New sensor product line from CURRENT tackles utility double whammy
Utilities facing the challenges of an aging/retiring workforce and an aging infrastructure can find themselves dealing with problematic feeders that require too much time and attention. With launch of its Intelligent Distribution Sensor (IDS) product line, CURRENT is offering a solution - and Pepco is taking them up on it with a rollout planned for the Washington, D.C. area.
The distribution automation company's new IDS family of products includes sensors for low and medium voltage, real-time analytics, power quality, integrated communications and DNP3 support. It's part of a trend to instrument the entire distribution network and to gradually more toward remote diagnostics and even limited forms of remote operation. Workforce retiring? Just replace them with sensors and software.
CURRENT says all of its IDS products support the ability to be accessed via their secure DNP3 interfaces from any compatible SCADA or third-party applications, or through CURRENTâ€™s OpenGridÂ® data visualization and reporting software. All of the sensors also support fully integrated communications capabilities that can be used within Verizon, AT&T or WiMAX networks. The sensors can also communicate over a third-party communications system such as wireless mesh or private radio via a simple Ethernet connection.
â€œUtilities in North America are transitioning their focus from the deployment of smart meters driven by stimulus funding, back to the basics of improving the distribution reliability of aging infrastructures with sensing solutions that provide visibility into grid operations,â€ said CURRENT CEO and President Tom Willie. â€œCURRENT is very pleased to showcase its technologies with a customer like Pepco who is committed to improving reliability in their network.â€
As part of a distribution grid reliability and modernization project in the Washington, D.C. area, Pepco is installing CURRENT's new underground residential development (URD) transformer and feeder sensors and will use the system to detect and communicate the location of underground cable faults and collect condition assessment information.
You might also want to read â€¦
CURRENT Selected by Pepco for Distribution Grid Modernization Project
Comprehensive Line of Intelligent Distribution Sensors Now Available in North America
DISTRIBUTECH, SAN ANTONIO, TX
January 23, 2012 -- CURRENT, a leading global innovator of utility grid infrastructure and software solutions, today announced that Potomac Electric Power Company (Pepco) has selected CURRENTâ€™s new underground residential development (URD) fault detection and grid monitoring system for a distribution grid reliability and modernization project in the Washington, DC area. Pepco is installing CURRENTâ€™s secure URD transformer and feeder sensors and is using the system to detect and communicate the location of underground cable faults and collect condition assessment information on cables in which the system is installed. The project is part of a series of initiatives that Pepco plans to use to modernize its distribution grid.
"Pepco has outlined a comprehensive plan and is committed to grid modernization and reliability improvements," said Karen Lefkowitz, VP of Business Transformation, Pepco. "CURRENT's innovative sensing solution is one of several key grid monitoring technologies that we are implementing that will have a positive impact on reliability for our customers. The DOE Smart Grid Investment Grants have given us the opportunity to speed up implementation of several technologies, including CURRENT's fault detection system."
CURRENT is also announcing the availability of a family of Intelligent Distribution Sensors (IDS) that improve grid efficiency, reliability, and power quality delivered within the network. These sensors are the first in the market to incorporate DNP3 messaging with secure authentication, scalability, integrated communications, and analytic algorithms custom tailored to specific applications in which the products are being used. Included in this comprehensive product portfolio are:
IDS 1000 â€“ Designed for Volt/VAR grid efficiency applications, the IDS 1000 provides clear visibility to voltage levels throughout a network and can enable the implementation of Integrated Volt/VAR Control (IVVC), so utilities can meet voltage threshold requirements and save energy.
IDS 2000 â€“ By measuring and analyzing voltage and current, the IDS 2000 provides real-time,
Connected IntelligenceTM. Utilities gain valuable insight into the performance of their networks and can proactively
improve efficiency and reliability of the distribution grid and support the integration of distributed renewable and electric vehicles.
IDS 3000 â€“ Provides the industryâ€™s first fully remote underground (URD) fault location detection and transformer monitoring system capable of pinpointing segment locations for URD faults. In addition, the IDS 3000 can be used to identify degraded cables, monitor primary current, and incorporates low voltage monitoring capabilities for voltage threshold, transient voltages, secondary neutral failures, and outage and restoration detection.
IDS 4000 â€“ Provides real-time remote fault detection and location for overhead and underground distribution networks. It reports ground faults, sensitive earth faults, and logs sub-cycle transient events. The IDS 4000 provides full monitoring and reporting of feeder voltage, current and power conditions, with no minimum operating current, and requires no calibration.
IDS 5000 â€“ Designed for critical asset power quality (PQ) monitoring applications, the IDS 5000 is the industryâ€™s first remotely manageable and accessible power quality analyzer. It provides the same core functionality as some of the industryâ€™s most advanced power quality data loggers, with the ability to fully access data, program, and receive alarms on all PQ parameters from the sensor remotely.
All of CURRENTâ€™s IDS products support the ability to be accessed via their secure DNP3 interfaces from any compatible SCADA or third-party applications, or through CURRENTâ€™s
OpenGridÂ® data visualization and reporting software. In addition, all the sensors support fully integrated communications capabilities that can be used within Verizon, AT&T, or WiMAX networks. The sensors can also communicate over a third-party communications system such as wireless mesh or private radio via a simple Ethernet connection.
"Utilities in North America are transitioning their focus from the deployment of smart meters driven by stimulus funding, back to the basics of improving the distribution reliability of aging infrastructures with sensing solutions that provide visibility into grid operations," said CURRENT CEO and President Tom Willie. "CURRENT is very pleased to showcase its technologies with a customer like Pepco who is committed to improving reliability in their network."
CURRENT will be exhibiting its new distribution sensors with S&C Electricâ€™s grid optimization software at DistribuTECH (Booth #1601) in San Antonio, Texas, January 24-26.
CURRENT provides leading distribution automation solutions, including core infrastructure and software products that enable
Connected Intelligence for utilities around the world. CURRENT provides applications that support utilities looking to implement smart metering, improve reliability, and enable grid communication. With over a decade of demonstrated innovation, CURRENTâ€™s products are a foundational component of some of the most advanced grid modernization deployments in the world. CURRENT has been recognized by Plattâ€™s Award of Excellence, the World Economic Forumâ€™s Technology Pioneer Award, and GoingGreenâ€™s Top 50 Cleantech companies.
CURRENT has operations around the world including the United States, Switzerland, Spain, Portugal, Italy, France, Turkey, Romania, Czech Republic, United Kingdom, Australia, and China. For more information about CURRENT, please go to www.currentgrid.com
# # #